Week 35 - Parallel MD
Reminder 1: There should always be 1 cycle reserved for parallel studies in the PSB.
Reminder 2: During the week (when possible) the PS will continue to work on the Matrix measurements with the 5-CM PFWs.
Monday 25/08 (08:00 - 12:00) - Setting-up of the beam to be used for BBLR in the SPS (this beam was only set-up and used in the SPS at 26 GeV/c until now)
Beam conditions: SPS user = MD1 (supercycle = SFT_LONG-3CNGS-LHCFAST-MD37_V1), PS user = TSTLHC25 and PSB user = LHC25A
#bunches = 12
Nb » 0.2 x 1011 p/b (asked the PSB to load the archive with this low intensity and the PS to check the beam). Possibility to ask the PSB to increase the intensity.
Transverse emittances: e* £ 3 mm
Longitudinal emittance: eL* = 0.35 eV.s
Contact Person: OP + RF (T. Bohl)
Monday 25/08 (12:00 - 18:00) and Tuesday 26/08 (08:00 - 18:00) - BBLR in the SPS
Beam conditions: SPS user = MD1 (supercycle = SFT_LONG-3CNGS-LHCFAST-MD37_V1), PS user = TSTLHC25 and PSB user = LHC25A
#bunches = 12
Nb » 0.2 x 1011 p/b (asked the PSB to load the archive with this lower intensity and the PS to check the beam in PS). Possibility to ask the PSB to increase the intensity.
Transverse emittances: e* £ 3 mm
Longitudinal emittance: eL* = 0.35 eV.s
Contact Person: F. Zimmermann
Wednesday 27/08 (08:00 - 16:00)
Thursday 28/08 (08:00 - 18:00)
Controlled transverse emittance blow-up in the SPS
Beam conditions: SPS user = LHCFAST1 (supercycle = SFT_LONG-3CNGS-LHCFAST-MD37_V1), PS user = LHC25 and PSB user = LHC25A & B
#bunches = 72
Nb » 0.2 x 1011 p/b (asked the PSB to load the archive with this lower intensity and the PS to check the beam in PS)
Transverse emittances: e* £ 3 mm
Longitudinal emittance: eL* = 0.35 eV.s
Contact Person: D. Manglunki
Transverse feedback in the PS
Beam conditions: PS user = MDPS and PSB user = TSTPS
Low-intensity SFTPRO-like beam (the intensity can be reduced by lowering the number of injected turns in the PSB)
Contact Person: F. Blas
Friday 29/08 (08:00 - 18:00)
BBLR in the SPS
Beam conditions: SPS user = MD1 (supercycle = SFT_LONG-3CNGS-LHCFAST-MD37_V1), PS user = TSTLHC25 and PSB user = LHC25A
#bunches = 12
Nb » 0.2 x 1011 p/b (asked the PSB to load the archive with this lower intensity and the PS to check the beam in PS). Possibility to ask the PSB to increase the intensity.
Transverse emittances: e* £ 3 mm
Longitudinal emittance: eL* = 0.35 eV.s
Contact Person: F. Zimmermann
Transverse feedback in the PS
Beam conditions: PS user = MDPS and PSB user = TSTPS
Low-intensity SFTPRO-like beam (the intensity can be reduced by lowering the number of injected turns in the PSB)
Contact Person: F. Blas
Author: Elias Métral - AB/ABP
Last update:
Friday, August 22, 2008 02:36:55 PM
Copyright
CERN